Hi All -

Troubleshooting some electrical problems (some of the switches don't work - horn and kill switch, and the select/set buttons) on my recently purchased ZForce 1000. I got underneath the dash to make sure everything is hooked up correctly (it "appears" to be.. haven't been able to trace the wires to both ends without a broader teardown).

I found these connectors, and I'm wondering if they are extras or if they should be hooked up to something. Does anyone recognize them?


In the first image you'll notice there's an orange wire that isn't connected to a bullet connector which looks like it was originally plugged in. I'll try reseating it later to see what that does, but wanted to ask if anyone is familiar with its purpose first.


These are the other two connectors.

Appreciate any feedback or comments!

[2015 Z Force 800 53/Trail EPS]

I believe the top black connector is the ODB2 port for the scanner. The other...best guess but the diagram should shed some light. The others are probably something to do with turn signals...but that a guess.

My ride has the factory turn signals (they come standard in Canada, where these things are NOT street legal.. go figure!) 

I'll take a look through the manual.. Good point on the scanner connection! Thanks!