Hey guys I'm about to pull the trigger on a DOT wheel/tire package and I was looking at two different wheels. One is the M12 Diesel the other is a X3, both sold at Revco.ca

I'm looking at the Traxion Alpha tire in a 28x10x14 size.

I noticed looking at the wheels, there are two different offsets depending on which wheel. One offset is 4+3 and the other is 5+2.

Which wheel would be recommended and could I expect clearance at full steering lock with either wheel with the same tire?


Thanks!

[2015 Z Force 800 53/Trail EPS]

You could use either one but I think the 5+2 might be an issue on the shocks up front so to be safe, I would go with the 4+3s. In either case both will be wider then the stocks as they are closer to +1.5s. I would also go with the same size tire all the way around...split the difference with say a 10" wide on all four.

Thanks for the feedback. So 4+3 in a 28x10x14 all the way around should be good? I appreciate the feedback

[2015 Z Force 800 53/Trail EPS]

Thanks for the feedback. So 4+3 in a 28x10x14 all the way around should be good? I appreciate the feedback

Yeah. Should be safe with that modern look.