0 Members and 1 Guest are viewing this topic.

CF Moto Z8 Half Windshields
« on: August 10, 2016, 06:08:51 PM »
We have a new line of CF Moto Z8 Half Windshields. The prices are already reduced for CF Moto Forum members and don't include shipping. Compare our option number 4 with others of that type available to see the saving your making.

CF Moto Z8 Half Windshield options & prices:

1/ Standard Lexan 9034 with bubble trim on bottom, automotive trim along sides, attaches with straps, no vent-$109.99
2/ Scratch Resistant Lexan MR10 with bubble trim on bottom, automotive trim along sides, attaches with straps, no vent-$154.99
3/ Standard Lexan 9034 with bubble trim on bottom, automotive trim along sides, attaches with Quick Connect Clamps, no vent-$134.99
4/ Scratch Resistant Lexan MR10 with bubble trim on bottom, automotive trim along sides, attaches with Quick Connect Clamps, no vent-$179.99
5/ Standard Lexan 9034 with bubble trim on bottom, automotive trim along sides, attaches with Quick Connect Clamps, Vented-$159.99
6/ Scratch Resistant Lexan MR10 with bubble trim on bottom, automotive trim along sides, attaches with Quick Connect Clamps, Vented-$204.99

If MR10 (scratch-resistant) is requested, your cost will increase $45.00 for each windshield.

If you need an additional combos costed, just let me know.  You will notice a new windshield attachment which is straps in the first two listings above. This is a new option that we will be making available as of next week. These make installation very easy and will lower the overall cost of our windshields.
Pacific Eagle UTV Enclosures were the first manufacture to support CF Moto with aftermarket Cab Enclosures and Windshields. Today we manufacture 32 Cab Enclosure combos for the UForce 800 and also the UForce 550. We also manufacture 28 Cab combos for the Z8, Z5 & Z6. We think we have pretty much got CF Moto covered.

Re: CF Moto Z8 Half Windshields
« Reply #1 on: August 10, 2016, 06:12:07 PM »
The vent will look like this one on the Wildcat.
Pacific Eagle UTV Enclosures were the first manufacture to support CF Moto with aftermarket Cab Enclosures and Windshields. Today we manufacture 32 Cab Enclosure combos for the UForce 800 and also the UForce 550. We also manufacture 28 Cab combos for the Z8, Z5 & Z6. We think we have pretty much got CF Moto covered.

*

Offline chuddly

Re: CF Moto Z8 Half Windshields
« Reply #2 on: August 11, 2016, 06:50:03 AM »
Do you have a picture of the quick connect clamps?  May be interested but i dont like the idea of Velcro for mine.
I can imagine a world completely at peace.  A world where there are no weapons, no war, and no violence at all.  And I can imagine us taking over that world because they would never expect it.

Re: CF Moto Z8 Half Windshields
« Reply #3 on: August 11, 2016, 01:32:01 PM »
Hi chuddly, I've attached the picture of our quick connect clamps. For more info about our CF Moto Half Windshields, we now have a webpage up for them. http://www.pacificeagleutv.com/cf-moto-z8-half-windshield
Pacific Eagle UTV Enclosures were the first manufacture to support CF Moto with aftermarket Cab Enclosures and Windshields. Today we manufacture 32 Cab Enclosure combos for the UForce 800 and also the UForce 550. We also manufacture 28 Cab combos for the Z8, Z5 & Z6. We think we have pretty much got CF Moto covered.

*

Offline NMKawierider

Re: CF Moto Z8 Half Windshields
« Reply #4 on: August 11, 2016, 01:41:35 PM »
There's a good idea...although your wide Velcro straps if anything like the OE CFM straps, they hold very well. I have had no issues with my Velcro straps.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS| Bandit Springs

My Videos On YouTube

Re: CF Moto Z8 Half Windshields
« Reply #5 on: August 11, 2016, 02:05:30 PM »
From the initial response that we have had, the Velcro straps could be a hard sell. They do work as good as our other hardware and are rated at over 5000 peels in a lifetime. Nobody will get close to removing their windshield that many times. This is the easiest method to install your windshield & after the straps are in place, your windshield is tightly secured.  We will be offering these as an option for all of our full size windshields like on the Arctic Cat shown above as of next week.
Pacific Eagle UTV Enclosures were the first manufacture to support CF Moto with aftermarket Cab Enclosures and Windshields. Today we manufacture 32 Cab Enclosure combos for the UForce 800 and also the UForce 550. We also manufacture 28 Cab combos for the Z8, Z5 & Z6. We think we have pretty much got CF Moto covered.

*

Offline chuddly

Re: CF Moto Z8 Half Windshields
« Reply #6 on: August 11, 2016, 03:01:04 PM »
Im not saying the velcro wont work.  Just for me i prefer something more permanent
I can imagine a world completely at peace.  A world where there are no weapons, no war, and no violence at all.  And I can imagine us taking over that world because they would never expect it.

Re: CF Moto Z8 Half Windshields
« Reply #7 on: August 11, 2016, 06:38:21 PM »
Yeah, I hear you. I think we will eventually replace our loop clamps with these Velcro straps though. One product or application will never win over everybody so the key is to have options.
Pacific Eagle UTV Enclosures were the first manufacture to support CF Moto with aftermarket Cab Enclosures and Windshields. Today we manufacture 32 Cab Enclosure combos for the UForce 800 and also the UForce 550. We also manufacture 28 Cab combos for the Z8, Z5 & Z6. We think we have pretty much got CF Moto covered.