0 Members and 1 Guest are viewing this topic.

*

Offline chuddly

Re: Zforce 800 Cage Chop
« Reply #30 on: February 28, 2017, 07:28:06 AM »
Sorry no I have not put my roof back on yet because im waiting on parts to paint my roll cage to match.  That above picture was chopped exactly like I chopped mine.  I talked to him to guide him though how I did it.  That is exactly how it will look with the roof on.
I can imagine a world completely at peace.  A world where there are no weapons, no war, and no violence at all.  And I can imagine us taking over that world because they would never expect it.

*

Offline rl2rem

Re: Zforce 800 Cage Chop
« Reply #31 on: March 02, 2018, 08:30:38 PM »
so its been a year,  how did this chop work out ?   ....and, is there really enough play in the bolts to drop the top section down with out cutting the front supports  ??

*

Offline NMKawierider

Re: Zforce 800 Cage Chop
« Reply #32 on: October 04, 2019, 11:39:09 AM »
Here's a question: Has anyone that has done the cage mod on an 800 ever taken the actual ID of the tube? When I get around to doing mine I plan on using these Bung/Connectors rather then just straight welding them. But they have to insert into the tube then be welded so...one needs to know the tubing's ID. I think it will be much stronger..for me at least.

https://utvdistribution.com/products/1-34-tube-universal-cage-connectors-adapters-clamping-bungs

2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline flash

Re: Zforce 800 Cage Chop
« Reply #33 on: October 04, 2019, 07:57:09 PM »
Hey NMK, I used the ones from super ATV , 1 3/4 the bolt pattern matched up with the bolt pattern of the z.
I’ve chopped several z cages.
2015 800EX.     Bandit Shocks
Two Brothers.    EZ Steer power steering
UNIfilter
Dynojet
Super ATV half windshield
Rival front and rear bumpers
Super ATV high clearance A-arms
Custom rockslides
29 inch bighorns
Secondary clocked to C1
Конструктор doors
Custom roll cage
MTX Mudsys30 soundbar
Fuel bead locks

*

Offline NMKawierider

Re: Zforce 800 Cage Chop
« Reply #34 on: October 04, 2019, 08:04:47 PM »
Hey NMK, I used the ones from super ATV , 1 3/4 the bolt pattern matched up with the bolt pattern of the z.
I’ve chopped several z cages.
Great! Thanks Flash. :)

2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube