0 Members and 1 Guest are viewing this topic.

*

Offline mayor hal

Re: Water leaks
« Reply #15 on: October 11, 2015, 12:36:04 PM »
I totally concur!
2015 CF Moto 800 ZForce 53"
UNI Air Filter

Gone but not forgotten!

2012 Can Am 650 Max XT
2007 Can Am 500 Max XT

*

Offline murdo

Re: Water leaks
« Reply #16 on: October 11, 2015, 03:41:42 PM »
Has anybody considered the waterless coolant? Works great for mine.
Won't freeze or boil and never have to change it.
« Last Edit: October 11, 2015, 03:45:42 PM by murdo »

*

Online NMKawierider

Re: Water leaks
« Reply #17 on: October 11, 2015, 03:59:19 PM »
Has anybody considered the waterless coolant? Works great for mine.
Won't freeze or boil and never have to change it.

I might do this. Jay likes it fine:


It should be noted there is a conversion process that should be followed:

http://www.waterlessenginecoolant.com/pages/how-to-convert
« Last Edit: October 11, 2015, 04:04:21 PM by NMKawierider »
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

*

Offline murdo

Re: Water leaks
« Reply #18 on: October 11, 2015, 04:25:57 PM »
This is the one I use, MX115.
http://liquidintelligence.com.au/
I can see a lot of advantages in using this (as well as stopping water pump leaking) particulary on vehicles that are stored for long periods (like winter) and those used in very hot climates.

*

Offline GoSaints

Re: Water leaks
« Reply #19 on: December 18, 2015, 04:04:13 PM »
Have a 2015 800 same problem... I've filled up twice, dealer says it should stop.  I just picked up some of this coolent online for $14 and free shipping.  Hopefully that will end it.  Love the moto, might be getting 2 new SxS's next

*

Online NMKawierider

Re: Water leaks
« Reply #20 on: December 18, 2015, 04:32:35 PM »
Have a 2015 800 same problem... I've filled up twice, dealer says it should stop.  I just picked up some of this coolent online for $14 and free shipping.  Hopefully that will end it.  Love the moto, might be getting 2 new SxS's next

This is not a stop leak. It also can not be used with any of the old water-type coolants. The system must be completely flushed out with their flushing agent prep to ensure no water or prior coolant exists and tested with their test strips. That's about 30 bucks a gallon and I don't think its sold in quarts. Then the cheapest of their waterless coolants are near 40 bucks a gallon and I don't see quarts sold there either.

If your pump mechanical seal hasn't stopped leaking in 200 miles, it isn't going to and needs replaced. Insist that with your dealer and don't mix any waterless coolant with any standard coolant.  The other thing others are saying is that with a good quality standard coolant like Prestone, their seals stopped leaking. Mine too leaked but quit in about 150 miles. I want to switch to this but the cost is ...not in my budget just yet. :)

2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube

Re: Water leaks
« Reply #21 on: March 24, 2016, 07:37:14 PM »
My mechanical seal on my z6 is leaking has been for a little bit I ordered the pump it came in one piece i like the design better than other atvs because the mechanical seal and the inner seal are all in one unit. Others i have dealt with the inner seal is inside the motor housing. seems like a better design i was just wondering what the rest of you though about it?
2012 Z6 trail
Homemade roof/Stereo system/KFI Snowplow/3 inch lift/28 inch maxxis bighorn 2.0/led running lights/thats it no more mods until i get the 800ex/wrong custom skid plate

*

Offline Cosmosdan

Re: Water leaks
« Reply #22 on: March 24, 2016, 08:03:21 PM »
Thumbs up on the one piece unit. I have done a lot of seals on different machines and this seems like a good idea to me.
2013 Z6 Trail
Iron Baltic skid plates
UE Boom Speaker mount
RZR 800 Shocks
Mostly stock trail riding
25g. Rollers and A1

2016 Outlander max 570
Too new for mods yet

*

Offline Workhardplayhard

Re: Water leaks
« Reply #23 on: March 18, 2019, 02:56:31 PM »
I know this is an old post. But I have the 500HO that's leaking coolant out the weep hole. Im wondering where y'all found the replacement pump? Thanks for the help!
🇨🇱 2016 Cforce 500 HO

*

Online NMKawierider

Re: Water leaks
« Reply #24 on: March 18, 2019, 04:05:00 PM »
I know this is an old post. But I have the 500HO that's leaking coolant out the weep hole. Im wondering where y'all found the replacement pump? Thanks for the help!
I get all my stuff from Alpha-Soprts.com
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube