0 Members and 1 Guest are viewing this topic.

*

Offline NMKawierider

Adjusted Rear Fenders for the 53"
« on: October 18, 2015, 07:30:55 pm »
Some of you know I bought a set of EX fenders for my 53 and because they kept getting caught on stuff the lower wings were taken off. Well still they got damaged on the woods weaving around rocks and trees. So, because I was never really happy with the looks and having to repair them again, I removed both front and back ex fenders and reinstalled the OE fronts. And sense they were F'ed-up any way I decided to...adjust the rears to ...be more 53" friendly and just barely cover the tire. They worked very well on our last outing..no issues at all. And I was able to keep the rear wings. Here's some pics:

http://s483.photobucket.com/user/BFFreak_2008/slideshow/CFMoto%20ZForce%20800/Fender%20Modifications
« Last Edit: March 03, 2016, 08:38:15 pm by NMKawierider »
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Tilt windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS

My Videos On YouTube  ...   My Videos On Vimeo

Re: Adjusted rear Fenders for the 53"
« Reply #1 on: October 18, 2015, 07:36:28 pm »
Nice work. CF Moto should look at it and do something similar. It looks good.
2015 ZForce 800EX EPS
Two Bros. slip-on
Snorkels
Half windshield
30" Monster mayhems on STI HD2s
2" lift
Secondary clocked to C4
1mm Primary Shim 3.25:1 Lowest Ratio
More to come

*

Offline NMKawierider

Re: Adjusted rear Fenders for the 53"
« Reply #2 on: October 18, 2015, 07:42:48 pm »
They should. The 53s really need something. I was going to build something out of some 1/8" sheet ABS but ran a string line over the EX fenders and decided give it a shot.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Tilt windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS

My Videos On YouTube  ...   My Videos On Vimeo

*

Offline mayor hal

Re: Adjusted rear Fenders for the 53"
« Reply #3 on: October 19, 2015, 12:31:22 pm »
NMKAWIERIDER. ..what did you use to cut the mud guards?  OBTW it looks real good.
2015 CF Moto 800 ZForce 53"
UNI Air Filter

Gone but not forgotten!

2012 Can Am 650 Max XT
2007 Can Am 500 Max XT

*

Offline Jogon30

Re: Adjusted rear Fenders for the 53"
« Reply #4 on: October 19, 2015, 02:13:08 pm »
Yeah bud I like it better then the way you had it before looks great

*

Offline NMKawierider

Re: Adjusted rear Fenders for the 53"
« Reply #5 on: October 19, 2015, 03:33:54 pm »
NMKAWIERIDER. ..what did you use to cut the mud guards?  OBTW it looks real good.
I laid a string across where I wanted to cut it, taped it down so it wouldn't move, then most of I use my prota-band, some just a fine tooth hand saw and a bit with some large snips. It cuts pretty easy actually.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Tilt windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS

My Videos On YouTube  ...   My Videos On Vimeo

*

Offline NMKawierider

Re: Adjusted rear Fenders for the 53"
« Reply #6 on: October 19, 2015, 03:45:43 pm »
Yeah bud I like it better then the way you had it before looks great

Yeah...me too. It was a little tough to put those 50-dollar each fenders under the..saw.. though...lol
The pressure washer did make short work of getting the bed liner off though.
« Last Edit: October 19, 2015, 04:32:39 pm by NMKawierider »
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Tilt windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS

My Videos On YouTube  ...   My Videos On Vimeo

*

Offline Gtnby2

Re: Adjusted rear Fenders for the 53"
« Reply #7 on: October 21, 2015, 12:36:59 am »
Nice!

*

Offline mayor hal

Re: Adjusted rear Fenders for the 53"
« Reply #8 on: November 03, 2015, 05:11:59 pm »
Here are the guards I have ordered through my dealer. They line up perfectly with the plastic rivets/studs. I may add a couple more rivets to each guard. Only one is in, the number of the pic is the rear driver side.
They from the 600 Snyper.
« Last Edit: November 03, 2015, 05:13:38 pm by mayor hal »
2015 CF Moto 800 ZForce 53"
UNI Air Filter

Gone but not forgotten!

2012 Can Am 650 Max XT
2007 Can Am 500 Max XT

*

Offline NMKawierider

Re: Adjusted rear Fenders for the 53"
« Reply #9 on: November 03, 2015, 06:57:02 pm »
Now that is perfect!
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Tilt windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS

My Videos On YouTube  ...   My Videos On Vimeo

*

Offline Jogon30

Re: Adjusted rear Fenders for the 53"
« Reply #10 on: November 03, 2015, 07:22:44 pm »
Mayor (how much were they ) are do u have the trail zforce? They look good

*

Offline mayor hal

Re: Adjusted rear Fenders for the 53"
« Reply #11 on: November 04, 2015, 04:31:49 am »
Mayor (how much were they ) are do u have the trail zforce? They look good

I believe the dealer quoted me around $70. CDN for each side. They don't stick out any further than the rock guards either. Yes my unit is the 53" model.
Now all I'm looking forward to getting is a lift kit and I will be one happy little Dude! :D
2015 CF Moto 800 ZForce 53"
UNI Air Filter

Gone but not forgotten!

2012 Can Am 650 Max XT
2007 Can Am 500 Max XT

*

Offline Jogon30

Re: Adjusted rear Fenders for the 53"
« Reply #12 on: November 04, 2015, 08:14:27 am »
My local dealer her sucks at getting me parts even after they said he signed up with cf Moto Canada ...yeah right!! I just emailed cf Moto to see if I can order me some lets see what happens

*

emersonsc

Re: Adjusted rear Fenders for the 53"
« Reply #13 on: November 04, 2015, 11:30:35 am »
Part numbers...

9060-260801   RIGHT LEFT FENDER FLARE FOR SNYPER
9060-260802   REAR RIGHT FENDER FLARE FOR SNYPER

*

Offline Jogon30

Re: Adjusted rear Fenders for the 53"
« Reply #14 on: November 04, 2015, 01:13:51 pm »
It might be a better idea to get some like you got Clark and chop them up that's a lot of cash