0 Members and 1 Guest are viewing this topic.

*

emersonsc

4/5 Point Harness Mounting Solutions
« on: December 17, 2015, 07:45:46 am »
I was wondering if anyone out there has installed either the CFMoto harness or the SuperATV (or really any brand for that matter) harnesses on their US/Canada units?

Can you include pictures? I would like to replace the crap seat belts with a harness, but dont see how or where to mount the harnesses.

*

Offline NMKawierider

Re: 4/5 Point Harness Mounting Solutions
« Reply #1 on: December 17, 2015, 08:10:30 am »
I have installed the SuperATV universal set. I choose to leave in the Stock belts as well which took a little more fabrication on their receiver brackets to gave both but it worked out well. I didn't take a lot of photos but the install is pretty straight forward otherwise. Great set of belts for the money and they are on sale right now. Here's those pics:

http://s483.photobucket.com/user/BFFreak_2008/slideshow/CFMoto%20ZForce%20800/SuperATV%20Harness

and here's the set I bought although the top clasp is more like the other set:

http://www.superatv.com/SuperATV-UTV-Latch-Seatbelts--P1017C1753.aspx

2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Tilt windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS

My Videos On YouTube  ...   My Videos On Vimeo

*

emersonsc

Re: 4/5 Point Harness Mounting Solutions
« Reply #2 on: December 17, 2015, 09:31:06 am »
I was hoping for pictures of HOW they were mounted to the unit.

*

Offline NMKawierider

Re: 4/5 Point Harness Mounting Solutions
« Reply #3 on: December 17, 2015, 11:16:11 am »
Ok, I can get what I can get but basically it uses the bolts for the receiver on the console side and the OE belt reel on the bottom on the outside and sense we don't have the same setup as the others on the upper mount, we use the upper bar and it straps to it. It is secure. 


UPDATE: I added more pics to the file. Some with comments. Hope this helps.

http://s483.photobucket.com/user/BFFreak_2008/slideshow/CFMoto%20ZForce%20800/SuperATV%20Harness
« Last Edit: December 17, 2015, 11:39:50 am by NMKawierider »
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Tilt windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS

My Videos On YouTube  ...   My Videos On Vimeo

*

emersonsc

Re: 4/5 Point Harness Mounting Solutions
« Reply #4 on: December 18, 2015, 07:19:28 am »
Ok, I can get what I can get but basically it uses the bolts for the receiver on the console side and the OE belt reel on the bottom on the outside and sense we don't have the same setup as the others on the upper mount, we use the upper bar and it straps to it. It is secure. 


UPDATE: I added more pics to the file. Some with comments. Hope this helps.

http://s483.photobucket.com/user/BFFreak_2008/slideshow/CFMoto%20ZForce%20800/SuperATV%20Harness

thats perfect thank you!

I hadnt realized the harnesses strap on the top instead of bolt.

Super ATV has a REALLY good deal on their harnesses right now until the 20th.

*

Offline NMKawierider

Re: 4/5 Point Harness Mounting Solutions
« Reply #5 on: December 18, 2015, 08:52:43 am »
Ok, I can get what I can get but basically it uses the bolts for the receiver on the console side and the OE belt reel on the bottom on the outside and sense we don't have the same setup as the others on the upper mount, we use the upper bar and it straps to it. It is secure. 


UPDATE: I added more pics to the file. Some with comments. Hope this helps.

http://s483.photobucket.com/user/BFFreak_2008/slideshow/CFMoto%20ZForce%20800/SuperATV%20Harness

thats perfect thank you!

I hadnt realized the harnesses strap on the top instead of bolt.

Super ATV has a REALLY good deal on their harnesses right now until the 20th.

The set comes with the bracket on top to bolt to the mount if yours has it.. but if not like all the rest here in the US, the bracket just slips off and straps to the bar. Nice system...especially for the money.. and if you set it slightly loose, woops are no issue like they are with the stock belts.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Tilt windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS

My Videos On YouTube  ...   My Videos On Vimeo