0 Members and 1 Guest are viewing this topic.

*

Offline SDHarleydad

12 volt dash socket
« on: August 27, 2018, 09:15:52 pm »
My 12 volt dash socket is not working.  Is there a fuse for this?

*

Offline NMKawierider

Re: 12 volt dash socket
« Reply #1 on: August 27, 2018, 11:22:23 pm »
Yes of course. With the rest of the distribution fuses.
« Last Edit: August 27, 2018, 11:25:10 pm by NMKawierider »
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS| Bandit Springs

My Videos On YouTube

*

Offline SDHarleydad

Re: 12 volt dash socket
« Reply #2 on: August 29, 2018, 12:27:40 pm »
fuses are good.   Any other suggestions?

*

Offline REDRIDER

Re: 12 volt dash socket
« Reply #3 on: August 29, 2018, 12:32:06 pm »
fuses are good.   Any other suggestions?
make sure it isn't the item that you are plugging into the socket that is faulty. then it comes down to chasing wiring.

*

Offline NMKawierider

Re: 12 volt dash socket
« Reply #4 on: August 29, 2018, 02:16:44 pm »
Mine has a bad connector just off from the harness about a foot from the fuse box...at least it has enough resistance to show a volt drop between each side...need to fix that someday...but maybe yours is .."real bad".
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS| Bandit Springs

My Videos On YouTube

*

Offline SDHarleydad

Re: 12 volt dash socket
« Reply #5 on: September 17, 2018, 10:59:40 am »
Ok, spent the day working on the Unit.  rechecked the fuse.  The fuse was good, but when I looked in the socket to plug it in again, I noticed one side was way down in the block so the fuse wasn't actually connecting.  Pushed it back up, put the fuse back in, and it works just fine!

*

Offline NMKawierider

Re: 12 volt dash socket
« Reply #6 on: September 17, 2018, 11:06:20 am »
Ok, spent the day working on the Unit.  rechecked the fuse.  The fuse was good, but when I looked in the socket to plug it in again, I noticed one side was way down in the block so the fuse wasn't actually connecting.  Pushed it back up, put the fuse back in, and it works just fine!
Chalk another one up to those fine HQ CFM electrical parts...Glad you got it man. Just goes to show..you can't rule-out anything with these.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS| Bandit Springs

My Videos On YouTube