0 Members and 1 Guest are viewing this topic.

*

Offline Eirvine

Reverse speed limiter override
« on: August 07, 2019, 06:42:28 PM »
Anyone know of a way to eliminate the reverse speed limiter on an ‘18 500s?

*

Offline NMKawierider

Re: Reverse speed limiter override
« Reply #1 on: August 07, 2019, 07:27:00 PM »
Anyone know of a way to eliminate the reverse speed limiter on an ‘18 500s?
The system is probably the same as the 800's but confirm with the wiring diagram for the 500s. If so, then I have a video in the How-To section on doing it.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS| Bandit Springs

My Videos On YouTube

*

Offline Skogsvarelse

Re: Reverse speed limiter override
« Reply #2 on: August 08, 2019, 05:32:55 AM »
You can "cut" (pull out the cable in the conection near the ecu) the cable color is skyblue white (light blue and white) If you pul it out in the conection cable conection youst before the ecu, you will stillö have thr R icon in the dash but no reverse limit.

Have done this to my 520/500s

*

Offline Eirvine

Re: Reverse speed limiter override
« Reply #3 on: August 08, 2019, 07:06:34 AM »
Thanks

*

Offline Eirvine

Re: Reverse speed limiter override
« Reply #4 on: August 09, 2019, 07:00:47 PM »
There’s a grey connector behind the side panel that leads into the harness for the ecu that you can actually just de-pin the sky blue wire with white tracer and tape it back to the harness and fill the hole on the connector with silicone should you ever want to return it to stock.