0 Members and 1 Guest are viewing this topic.

*

Offline Kimjc

Front brakes don't work
« on: January 31, 2019, 06:12:23 AM »
I pull my front brake handle and it goes all the way in but the brakes don't work. How do I bleed them if that is the problem ?

*

Offline NMKawierider

Re: Front brakes don't work
« Reply #1 on: January 31, 2019, 07:37:06 AM »
I pull my front brake handle and it goes all the way in but the brakes don't work. How do I bleed them if that is the problem ?
Need to first see if the reservoir being low is the problem by taking the lid off the master cylinder and checking. If it is, need to find and fix the leak first, then there are many YT videos on bleeding motorcycle/ATV brakes. If it's full, the master cylinder has a problem and needs rebuilt or replaced. Once done you will also need those YT videos.     
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS| Bandit Springs

My Videos On YouTube