0 Members and 1 Guest are viewing this topic.

*

Offline roadrunner88

cannot drive more than 40km/h...someting is broken..
« on: August 25, 2017, 04:59:23 am »
Hello,

i have a cfmoto 500 and it used to worked and drive very well. now i have a problem.

if i want to drive more than 40kmph the atv does start to struggle and it stops accelerating. what is the reason of that?

one hint:
if i do press the overdrive button on the handlebar( i mean the button behind the lighter-buttons) it does drive normaly as long as i  am keep pressing.

i am looking forward to get some help here;)

greetings from germany.


*

Offline NMKawierider

Re: cannot drive more than 40km/h...someting is broken..
« Reply #1 on: August 25, 2017, 09:34:01 am »
Test the reverse sensor and test that the differential lock isn't engaged or that the button hasn't failed. Needing to use the override indicates the ECU is getting a signal from one of those sensors in regular drive conditions. Is the "X" that is between the drive wheels on the POD on?   
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS| Bandit Springs

My Videos On YouTube

*

Offline roadrunner88

Re: cannot drive more than 40km/h...someting is broken..
« Reply #2 on: August 25, 2017, 02:40:59 pm »
Test the reverse sensor and test that the differential lock isn't engaged or that the button hasn't failed. Needing to use the override indicates the ECU is getting a signal from one of those sensors in regular drive conditions. Is the "X" that is between the drive wheels on the POD on?

thank you, this helped! after i changed in the 4x4 mode and back to 2wheel drive...it finally worked again.

thanks.