« previous next »
Pages: [1]   Go Down

0 Members and 1 Guest are viewing this topic.

*

Offline skynet1126

500HO HARD TO SHIFT
« on: October 13, 2018, 03:01:12 PM »
DO many people have this problem?  Its very hard to shift sometimes between gears with the lever...especially into reverse.  Many times I have to "rock-it" to get it to cooperate but didnt know of theres an adjustment that Im missing...

Thanks!
Kevin in NH
Logged
*

Offline Erikb

Re: 500HO HARD TO SHIFT
« Reply #1 on: October 16, 2018, 01:23:20 PM »
They are pretty stiff from the factory.  How old is it?  I know mine took a little breaking in, but now it shifts just like anything else. 
Logged
*

Offline skynet1126

Re: 500HO HARD TO SHIFT
« Reply #2 on: October 17, 2018, 02:30:32 AM »
its got 1500 miles on it...
Logged
*

Offline jayB

Re: 500HO HARD TO SHIFT
« Reply #3 on: October 17, 2018, 02:52:30 PM »
there is a spring loaded pin under the shift lever that is accuated by the foot break using a cable and spring method. this can be adjusted.
Logged
*

Offline doug80638

Re: 500HO HARD TO SHIFT
« Reply #4 on: October 17, 2018, 05:16:29 PM »

I have 1000 miles on my Z, and while it is much better since new, I still need to be careful about shifting between gears. If there is any pressure on the gears in the transmission, I usually have to move the machine a bit before it will pop out of gear. It's usually fine once it makes it to neutral.
Logged
2017 Zforce 800 - Red
SuperATV Flip windshield
Tusk soft rear window
Uni-Filter foam air filter
Bandit springs
Pages: [1]   Go Up
« previous next »