0 Members and 1 Guest are viewing this topic.


Offline kman

Sticky Key Lock
« on: April 12, 2020, 02:27:16 PM »
Greetings,new owner of 2020 CFMOTO ZForce 800EX and new to the forum.
Was wondering if anyone has had issues with a sticky key lock. Was going to spray a little dry lock grease in it to try. Doesn't want to spring back from start position to run.


Offline Jeff

Re: Sticky Key Lock
« Reply #1 on: April 12, 2020, 02:42:56 PM »
I used some wd40 professional on mine. Works good now.
2018 ZForce 800 EXP
 half windshield
frear brush guard
Rival front bumper
Rock slides
Air Dam stage 5 clutches
31x8.5 motohavok tires
2” lift kit
Led Rock lights
42” Led light bar and two 3” light pods
Boss Bluetooth stereo


Offline NMKawierider

Re: Sticky Key Lock
« Reply #2 on: April 12, 2020, 03:08:51 PM »
In any electrical switch like that you want to use only an electrical contact cleaner spray as what it leaves won't effect the contacts like other products will. If it was just a key lock...sure..any PB or WD or lock spray would work. But switches..use contact spray cleaner. Lowes has some I use all the time. 

If your switch is just sticky it should work fine but if it is defective or has a bent contact...it won't and the switch will need replaced.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | 9.7" GPS | Bandit Springs Rear & Gen-3 Shocks Front

My Videos On YouTube