0 Members and 2 Guests are viewing this topic.

*

Offline Jogon30

Wheel stud size bolt pattern?
« on: October 20, 2015, 10:49:08 pm »
Does any one know the bolt pattern and stud/nuts size? On a zforce 800  thank you.
« Last Edit: October 20, 2015, 10:54:53 pm by Jogon30 »

*

Offline NMKawierider

Re: Wheel stud size bolt pattern?
« Reply #1 on: October 20, 2015, 11:18:37 pm »
Does any one know the bolt pattern and stud/nuts size? On a zforce 800  thank you.
They are 4/110 and the same size as my Brute except slightly shorter. I have some spares I could measure if needed.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Tilt windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS

My Videos On YouTube  ...   My Videos On Vimeo

*

Offline Jogon30

Re: Wheel stud size bolt pattern?
« Reply #2 on: October 21, 2015, 02:41:18 pm »
Just need stud size and thread?

*

Offline NMKawierider

Re: Wheel stud size bolt pattern?
« Reply #3 on: October 21, 2015, 03:12:55 pm »
Just need stud size and thread?

Did you break one? I have a few new spares for the Brute. You can have one.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Tilt windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS

My Videos On YouTube  ...   My Videos On Vimeo

*

Offline Jogon30

Re: Wheel stud size bolt pattern?
« Reply #4 on: October 21, 2015, 04:31:37 pm »
No my friend has some brand new 1.5inch spacer and I was going to try them on but he lives in El Paso tx so before he sends them to me I wanted to make sure the bolt pattern and stud Worked They fit 10mm x 1.25 or 10x1.25 or M10x1.25 Studs / Nuts
Bolt Pattern4x110 ????
« Last Edit: October 21, 2015, 04:33:14 pm by Jogon30 »

*

Offline NMKawierider

Re: Wheel stud size bolt pattern?
« Reply #5 on: October 21, 2015, 05:43:17 pm »
No my friend has some brand new 1.5inch spacer and I was going to try them on but he lives in El Paso tx so before he sends them to me I wanted to make sure the bolt pattern and stud Worked They fit 10mm x 1.25 or 10x1.25 or M10x1.25 Studs / Nuts
Bolt Pattern4x110 ????

Oh, sure, they should fit. Like I said the Kawasaki's are the same just a hair longer. I'll measure them tonight and post here.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Tilt windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS

My Videos On YouTube  ...   My Videos On Vimeo

*

Offline Jogon30

Re: Wheel stud size bolt pattern?
« Reply #6 on: October 21, 2015, 05:49:32 pm »
Thank you Im a give it a try and i wanted to know the stud size and tread size just to have if I ever need to replace ? Does anyone know
« Last Edit: October 21, 2015, 06:01:00 pm by Jogon30 »

*

Offline NMKawierider

Re: Wheel stud size bolt pattern?
« Reply #7 on: October 21, 2015, 06:42:41 pm »
Well the stud is a 10mmx 1.25 thread and the threaded part the would stick past the hub is 25mm. The moto's are like 22-23mm but to be sure I would need to take a wheel off and measure.  I think the spacers should work.
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Tilt windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS

My Videos On YouTube  ...   My Videos On Vimeo

*

Offline Jogon30

Re: Wheel stud size bolt pattern?
« Reply #8 on: October 21, 2015, 09:38:03 pm »
One more question does anyone know the wheel center bore is it 74mm? Thank u