0 Members and 1 Guest are viewing this topic.

*

Offline Stupidbash

Cigarette Adapter
« on: October 26, 2018, 11:39:04 am »
NMK HELP!!! Lol - I cant for the life of me figure out why my cigarette adapter isn’t working. All of my fuses are fine and it appears the wiring is all connected. Any ideas?
2018 Zforce 1000
Uni 2 Stage filter, Pro Armor 4 pt harness, GCL Front windshield w/ vents and SSL 700 watt 8 1/2” Bluetooth sound bar

*

Offline REDRIDER

Re: Cigarette Adapter
« Reply #1 on: October 26, 2018, 12:41:54 pm »
NMK HELP!!! Lol - I cant for the life of me figure out why my cigarette adapter isn’t working. All of my fuses are fine and it appears the wiring is all connected. Any ideas?
Well if you have power and ground at the receptacle then the receptacle would be the culprit

*

Offline Sockman

Re: Cigarette Adapter
« Reply #2 on: October 26, 2018, 02:06:36 pm »
Stop smoking.

 :D
2017 Zforce 800 EX

*

Offline NMKawierider

Re: Cigarette Adapter
« Reply #3 on: October 26, 2018, 04:38:46 pm »
Like REDRIDER says, test for power to the receptacle and test the other lead for using ohms setting. If if both there, replace the receptacle. Of course the loss of either will cause the same outcome.Also..step-1, look inside to make sure the center probe is clean and nothing has gotten down inside and well as the sides.
« Last Edit: October 26, 2018, 04:40:21 pm by NMKawierider »
2015 Z Force 800 (53") EPS -
Custom Air Intakes | Custom Exhaust Mod | SuperATV Harness | Custom Fenders | Custom Skid/Rock Sliders | 27" GBC Grim Reapers | Seizmik Mirrors |Конструктор (Rodin's) Doors | Dr Pulley Sliders | 1.5" Wheel Spacers | BENZ Silencer (as needed) | SATV Flip Windshield W\ Rear Shield | Dual Light Bars | Diamond Plate Storage | Magellan TRX7 GPS| Bandit Springs

My Videos On YouTube

*

Offline glenlivet

Re: Cigarette Adapter
« Reply #4 on: October 29, 2018, 10:43:21 am »
Put more power points in. Can never have too many.  8)

For a nation to believe it can tax itself into prosperity is like a man standing in a bucket and believing he can raise himself by pulling on the handle - Winston Churchill

*

Offline Stupidbash

Re: Cigarette Adapter
« Reply #5 on: October 30, 2018, 11:27:05 am »
That’s actually what I ended up doing, I ran 2 additional cigarette adapters off the battery. Works great as long as I disconnect my Bluetooth speaker and whatever else is plugged in so I don’t drain my battery. Can I somehow connect those new adapters to the ignition so they can just stay permanently plugged in?
2018 Zforce 1000
Uni 2 Stage filter, Pro Armor 4 pt harness, GCL Front windshield w/ vents and SSL 700 watt 8 1/2” Bluetooth sound bar

*

Offline REDRIDER

Re: Cigarette Adapter
« Reply #6 on: October 30, 2018, 12:18:24 pm »
You could. You could keep it wired the way it is but break one of the circuits and install a relay and jumper the switch side of the relay from a key on power source that will complete the circuit for the power outlets for when the key is on.